To configure and test a device on the Softruck platform, it must first be properly registered in the tool.
Once the device is properly registered, you must configure it to report to the Softruck platform.
In this manual, we will learn how to perform this configuration via text messages (SMS), which must be sent to the SIM card number embedded in the respective device.
Before sending the configuration commands:
Install the SIM card in your device.
Connect the device to a 12V power source.
LV12 configuration commands:
Command to configure the APN:
APN,apn,username,password#
Exemple: APN,softruck.com,softruck,softruck#
Command to configure IP and Port:
SERVER,0,3.227.57.241,3676,0#
Command to configure the time zone:
GMT,W,0,0#
Command to disable UTC:
UTC,OFF#
Done! Just check the device’s online status in the Softruck tool. If the device is not communicating, check the SIM card, the registered IMEI, and the settings that were sent.
Additional Commands
Command to reset the device:
RESET#
Command to check the device’s settings and sensors:
STATUS#
Request location via SMS:
WHERE#
Command to block:
RELAY,1#
Command to unlock:
RELAY,0#
It is important to note that for the platform to recognise the device, it must be registered correctly.
If you have read this far in our article, we believe you may be interested in speaking to our team of experts. Click the button below to find out more:
