To configure and test a device on the Softruck platform, it must first be correctly registered in the tool. Once the device is properly registered, it must be configured to report to the Softruck platform.
In this manual, we will learn how to perform this configuration via text messages (SMS), which must be sent to the number of the chip embedded in the respective equipment.
Before starting to send the configuration commands:
Install the SIM chip in your device.
Connect the equipment to a 12V power source.
It is important to note that the APN, username, and password information must be updated with the correct information for each one, as they vary according to the chip supplier and the operator used.
Once this is done, send the following commands to configure your NONUS 4G device
NONUS N4 configuration commands:
Command to configure APN:
APN,apn.com,username,password#
IP and Port configuration command:
SERVER,0,18.232.201.231,3674,0#
Done! Just check the status of the device online using the Softruck tool. If the device does not communicate, check the chip, the registered IMEI, and the settings sent.
It is important to note that for the platform to recognize the device, it must be registered properly.
Additional commands:
View complete settings:
PARAM#
Restart the tracker:
RESET#
LOCATION query:
WHERE#
Configure Virtual Ignition off:
SZCS#ACCLINE=1
Configure Virtual Ignition on:
SZCS#ACCLINE=0
Check Transmission Time:
TIMER#
SLEEP Configuration:
SENDS,A# A=0-300 minutes
ODOMETER Configuration:
SZCS#GT06METER=A
A=0 , reports in kilometers (default)
A=1 , reports in meters.
Command example: SZCS#GT06METER=1
Lock:
RELAY,1#
Unlock:
RELAY,0#
If you have reached this point in our article, we believe you may be interested in talking to our team of experts. Click the button below to learn more:
