To configure and test a device on the Softruck platform, it must first be correctly registered in the tool. If this has not yet been done, you can check our tutorial: How to register a chip and device.
In this manual, we will learn how to perform this configuration via text messages (SMS), which must be sent to the number of the chip embedded in the respective equipment.
Before starting to send the configuration commands:
Install the SIM chip in your device.
Connect the equipment to a 12V power source.
Make sure the device is in an open area to facilitate communication.
Once this is done, send the following commands to configure your E3+ device.
E3+ configuration commands:
Command to start the settings:
REG000000#
Command to activate SMS response:
SMS1
TCP mode command:
TCP
Command to configure APN:
APN*apn*user*password
Note: It is important to note that the APN, user, and password information must be changed with the correct information, as they vary according to the chip supplier and the operator used.
IP and port configuration command:
IP1#18.232.201.231#3682#
DNS command:
If the device does not communicate with the IP/port, the DNS can be set to enable this communication.
DNS#e3.softruck.com#3682#
Command to configure Ignition On reporting time:
HB30
Command to configure Ignition Off reporting time:
SHB600
Command to configure Timezone:
TZW0
Command to turn off SMS response:
SMS0
That's it! Just check the status of the device online using the Softruck tool. If the device does not communicate, check the chip, the registered IMEI, and the settings sent.
Additional Commands:
Commands to restart the device:
REG000000#
SMS1
EN
RESTART
Command to request location:
REG000000#
SMS1
CQ
LOCA
Enable Chinese or English version:
Chinese: CN
English: EN
Communication time:
TX600
Restart Module:
English version: RESTART
Chinese version: CQ
Lock:
English version: ENGOFF
Chinese version: DD
Unlock:
English version: ENGON
Chinese version: TD
Communication time with ignition ON (60 seconds):
HB60
Communication Time with Ignition OFF (1 hour):
SHB3600
Request Position (SMS):
English version: LOCA or GOOGLE
Chinese version: DW or GOOGLE
Reset Factory Settings:
English version: RST
Chinese version: CSH
Request IMEI:
IMEI
Request ICCID:
ICCID
If you have reached this point in our article, we believe you may be interested in talking to our team of experts. Click the button below to learn more:
