To test the devices, you need to follow a few steps. Let’s take a look:
📌 When registering the devices, note that they have a 15-digit IMEI, and the identifier may vary depending on the device model. Enter the device model, and the platform will indicate how many digits the identifier will have.
📌 Ensure the device is correctly connected to the main positive, negative, and post-switch wires; this is essential for proper operation.
➡ Power the device using a 12V power source
📌 Check with your SIM card provider to confirm that the line inserted into the device is active at the time of testing and installation.
➡ If your line provider is Softruck, you can contact support to have them perform the necessary procedures.
📌 Send the configuration commands for this device if the line is updating normally. I’ve included the links to the SMS configuration manuals for the devices below:
📌 The final step, if everything is correct, is to check whether the device’s LED is flashing in the correct pattern to indicate that it is connected to the network; if not, you will need to count how many times it is flashing and consult the table in the manual.
➡ If the issue is due to poor signal coverage, for example, we recommend moving the device to a more open area, avoiding shaded areas.
❗ You can find the light pattern information in your equipment’s installation manual!
Here’s the link to the installation manuals again, which contain the light pattern information for each piece of equipment. Just click here to view them.
✨ Follow each step to ensure your procedure is successful!
If you’ve made it this far in our article, we think you might be interested in speaking with our team of experts. Click the button below to learn more:
