To configure and test a device on the Softruck platform, it must first be properly registered in the tool. If this has not yet been done, please refer to our tutorial: How to register a SIM card and device.
Once the device is properly registered, you must configure it to report to the Softruck platform.
In this manual, we will learn how to perform this configuration via text messages (SMS), which must be sent to the SIM card number installed in the respective device.
Before you begin sending the configuration commands:
Install the SIM card in your device.
Connect the device to a 12V power source.
Once this is done, send the following commands to configure your STG 50 device
Command 1: *SPJLX*P:753869*U:3.229.251.111,3671,1,#
If you need to configure the settings, make sure that the APN, username, and password are updated with the correct information for each, as they vary depending on the SIM card provider and the carrier used.
Below is the command used to perform this configuration:
Command 2: *SPJLX*P:753869*A:APN,username,password#
Done! Just check the device’s online status in the Softruck tool. If the device does not communicate, check the SIM card, the registered IMEI, and the settings sent.
It is important to note that for the platform to recognize the device, the registration must be done correctly.
If you've made it this far in our article, we believe you might be interested in joining our team of experts. Click the button below to learn more.
